DJI Neo 2 Digital Transceiver
Overview
The DJI Neo 2 Digital Transceiver is a small, essential module that attaches to the DJI Neo 2 drone to enable stable, low-latency video transmission when using a remote controller or goggles, connecting via the drone’s USB-C port and requiring secure screw fastening before powering on the aircraft; it’s specifically for enhanced control and FPV flying, not needed for smartphone-only operation, and ensures reliable communication for advanced features like FPV.
When flying the drone with a remote controller or goggles, install DJI Neo 2 Digital Transceiver for stable, low‑latency video transmission.
Tips
1. Do not install or remove DJI Neo 2 Digital Transceiver while the drone is powered on. Make sure it is installed before turning on the drone.
2. Avoid applying external force to the antenna to prevent deformation.
3. After every 30 hours of flight (approximately 60 flights), check that the screws on DJI Neo 2 Digital Transceiver are not loose, and tighten them securely if necessary.
In The Box
DJI Neo 2 Digital Transceiver × 1
Specifications
Dimensions: 44.6×27×44.6 mm (L×W×H)
Weight: Approx. 9 g
Compatibility: DJI Neo 2
